Universal Window Air Conditioner Bracket Supports Up to 85 lbs for 5,000-12,000 btu AC Units

Window Requirements:

In order to ensure proper installation of the window air conditioner bracket, the following window requirements must be met:

• The window sill thickness should not exceed 12 inches.
• The window sill must be at least 1 1/4 inches deep to accommodate the base.
• The window sill should be capable of accepting 2 1/2-inch-long screws.
• The sliding window lip or window stool cannot exceed 1 7/8 inches.
• This bracket is not suitable for use with slide casement or casement windows.

Easy Installation Steps:

1. Find the appropriate mounting position and drill screw holes into the window sill.
2. Align and mount the bracket to the sill.
3. Adjust the angle with a round spacer and increase height with a flat spacer.
4. Place the rubber pad against the exterior wall, connect the leg and support body.
5. Mount the bracket slightly tilted to allow for draining of condensation.
6. Lock the leg and support shelf in place.

Installation Tips:

• The bracket should be installed with a slight tilt downward to facilitate condensate drainage.
• It fits wall thicknesses ranging from 2" to 11" with cement, wood, and brick sills, but is not suitable for hollow aluminum, vinyl, or plastic sills.
• The bracket is compatible with most window units ranging from 5,000 to 12,000 BTU and can support up to 85 lbs.
• All necessary hardware is included for an effortless indoor installation, avoiding the need to drill through exterior walls or siding.
• The bracket is constructed from heavy-duty steel with a powder coating for durability in all weather conditions.
• It has an exclusive built-in bubble level for correcting mounting slope position and safely transfers weight from the window sill and sash to the support and window frame.

product information: